You found us!
RESIN BOUND & RESIN BONDED SPECIALISTS
HMS Trade Counter | Full Driveway Installations Available | Training Workshops
Decra-Stone Resin Bonded Surfacing ABC Small Trade Kit with Aggregate
£79.95 + VAT
Decra®Stone 10kg ABC Small Trade Kit – Resin Bonded Decorative Surfacing:
Up to 6m² Coverage for Smaller Projects and Repairs
Decra®Stone 10kg ABC Small Trade Kit is your complete DIY solution for laying resin bonded surfacing. The combined resin weight is 10kg, to include Parts A & B, and is supplied with 50kg (2 x 25kg bags) of specialist washed and dried decorative aggregate in a range of sizes to cover a work area of up to 6m² dependent on aggregate size and intended surface.
Decra®Stone resin bonded surfacing is a fantastic modern alternative to more traditional surfacing options. Available in a huge variety of colours, Decra®Stone is an extremely durable contemporary surfacing system, designed to dramatically transform new and existing areas of asphalt or concrete with minimal preparation and disruption. With an expected life-span of 8-15 years under normal conditions, Decra®Stone also demonstrates excellent value for money.
Decra®Stone is specifically designed for laying driveways, patios, footpaths, and other areas of hard landscaping, to include vehicle trafficked and parking areas.
1 x Small 10kg Decra®Stone ABC Trade Kit will cover up to 6m² based on a sound, close graded surface such as tarmac/asphalt or concrete, and using a 1-3mm sized aggregate.
Calculate your kit requirements by multiplying the width and length measurements of your work area.
i.e. 5Lm x 2Lm = 10m²
We recommend allowing for a 10% material contingency when calculating quantities as surface porosity may vary. Depending on size, it may be advantageous to purchase a combination of small and large kits to reduce waste, and to most cost effectively complete your project.
Decra®Stone 10kg ABC Small Trade Kit: Resin Bonded Surfacing:
1 x pack includes:
1 x Part A Resin Component (5kg)
1 x Part B Resin Component (5kg)
1 x Part C Mixing Vessel
2 x 25kg Bags Specialist Washed & Dried Aggregate (colour dependent on chosen finish)
Recommended to complete your project:
- Flat headed squeegee
- Serrated head squeegee
- High torque drill with helical whisk attachment
- Wheel barrow
- Polythene to protect floor
- Masking tape
- White spirits & cloths
- Tape measure
- Disposable gloves
Good to Know: Always check the dimensions of your application area before commencing work, to make 100% sure you have enough material to complete your project. We would recommend factoring a 10% contingency when ordering materials, as surface porosity may vary.
Cooler weather increases product curing time.
Do not lay in wet weather.
Do not lay below 5 degrees centigrade.
Aggregate packaging design may vary.
A suitable primer should be applied to concrete areas ahead of product application.
We strongly recommend reading the Application Guide fully before commencing work.